Stainless Steel Cable Railing System RP1-2000

The RP1-2000 cable railing system is an all-round profile railing system.

  • The posts are a 2" round profile and they are pre-drilled for cables.
  • The top cap is also a 2" round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
  • The cable system is a 3/16" 1×19 dia. cable with adjusters at each end of the cable for tensioning.
  • Lighted rail option available.

This system can be surface mounted, fascia mounted or core drilled. This system is offered in a Type 316 stainless steel for higher corrosion resistance or a Type 304 stainless steel for less corrosive environments. The standard finish is a #4 brushed satin but others finishes are available.

Stainless Steel Vertical Cable Railing System VC1-2000

The VC1-2000 cable railing system is our vertical cable railing system.

  • The vertical post is a 1 1/2" × 2" rectangular profile.
  • The horizontal upper and lower posts that the cable attaches to are a 1 1/2" × 1 1/2" square profile.
  • The top cap is a 2" dia. round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of 3/16" dia. 1×19 cable 3" o.c. with a decorative dome head fitting at the upper and an adjustable fitting at the lower end for tensioning.
  • Lighted rail option available.

This system can be surface mounted, fascia mounted or core drilled. The standard finish is a #4 brushed satin but others finishes are available.

This is a welded stainless steel railing system with vertical stainless steel cable infills. The system is designed with options for either bolt in or core drilled cable railing applications. The 3/8" × 1 1/2" flat bar vertical balusters are constructed of stainless steel in a standard #320 non-directional finish or powder coating. The horizontal pieces are constructed of 1 1/2" stainless steel u-shaped bars. The handrail is designed from a 1 1/2" stainless steel tube.

  • Stainless Steel Handrail System 2100 – Utilizes a stud to stud with cap nut connector on one end and stud to stud with ball end on the opposite end.
  • Stainless Steel Handrail System 2100-TB – Connects the cable to the baluster with a tie bar threaded at each end.
  • Stainless Steel Handrail System 2410 – For a dome head to stud connector select the System 2410.
  • Stainless Steel Handrail System 2510 – Designed with a stemball to stud connectors.

Stainless Steel Cable Railing System SP1-2000

The SP1-2000 cable railing system is our most popular and cost effective railing system.

  • The posts are a 1 1/2" square profile and they are pre-drilled for cables.
  • The top cap is a 1 1/2" round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
  • The cable system is a 3/16" dia. cable with adjusters at each end of the cable for tensioning.
  • Lighted rail option available.

This system can be surface mounted, fascia mounted or core drilled. The standard finish is a #4 brushed satin but others finishes are available.

Stainless Steel Cable Railing System FB3-2000

The FB3-2000 cable railing system is a combination of flat bar and round profile railing system. This system is similar to our FB1-2000 except the cables are visible as they pass through the post.

  • The posts consist of (2) 1/2" × 1 1/2" flat bars bridged together by (2) 1/2" × 1 1/2" gusset plates.
  • The top cap is a 1 1/2" round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
  • The cable system is a 3/16" 1×19 dia. cable with adjusters at each end of the cable for tensioning.

This system can be surface mounted, fascia mounted or core drilled. This system is offered in a Type 316 stainless steel for higher corrosion resistance or a Type 304 stainless steel for less corrosive environments. The standard finish is a #4 brushed satin but others finishes are available.

Stainless Steel Cable Railing System FB1-2000

The FB1-2000 cable railing system is a combination of flat bar and round profile railing system.

  • The posts consist of (2) 1/2" × 1 1/2" flat bars bridged together by 1/2" diameter tubes that the cables pass through.
  • The top cap is a 1 1/2" round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
  • The cable system is a 3/16" 1×19 dia. cable with adjusters at each end of the cable for tensioning.

This system can be surface mounted, fascia mounted or core drilled. This system is offered in a Type 316 stainless steel for higher corrosion resistance or a Type 304 stainless steel for less corrosive environments. The standard finish is a #4 brushed satin but others finishes are available.