Aluminum Powder Coated Stainless Steel Cable Railing System

The AP1-2000 cable railing system is our aluminum cable railing system. The aluminum offers a cost savings and a choice of color.

  • The posts are a 2 3/8" square profile.
  • The top cap is a 3 3/4" × 2" oval profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
  • The cable system is a 1/8" 1×19 dia. cable with adjusters at each end of the cable for tensioning.

This system can be surface mounted or fascia mounted. The standard finish is a marine grade primed and powder coat finish to customer’s choice of color.

Stainless Steel and Glass Railing System SPG2-2000

The SPG2-2000 is our glass panel railing system.

  • The vertical post is a 1 1/2" × 1 1/2" square profile.
  • The top cap is a 1 1/2" dia. round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The glass panels are a 1/2" thick tempered glass and they attach to the post using (4) glass compression clamps.

This system can be surface mounted, fascia mounted or core drilled. The standard finish is a #4 brushed satin but others finishes are available.

Stainless Steel Cable and Glass Railing System SPG1-2000

The SPG1-2000 cable railing system is a combination of cable and glass railing system.

  • The posts are a 1 1/2" square profile.
  • The top cap is a 1 1/2" round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of (8) horizontal layers of cable for a 42" high rail and (6) layers for a 36" high rail.
  • The cable system is a 3/16" 1×19 dia. cable with adjusters at each end of the cable for tensioning.
  • The bottom of the rail has a 1/2" thick 12" high tempered glass panel w/ safety film applied to one side.

This system can be surface mounted, fascia mounted or core drilled. This system is offered in a Type 316 stainless steel for higher corrosion resistance or a Type 304 stainless steel for less corrosive environments. The standard finish is a #4 brushed satin but others finishes are available.

Q-line Stainless Steel Railing System DL1-2000

The DL1-2000 is our double line railing system. This railing system is similar to the single line but has an additional horizontal bar that runs midway between the top of the rail and the ground. This railing system is ideal for areas that do not need to meet the 4" sphere code requirement but still keeps pedestrians on a guided path.

  • This system uses a 1 1/2" dia. round profile for the vertical post, top cap and mid-section post.
  • The vertical post and mid-section post are all coped and welded to the top cap to form a completely welded railing system.

This system can be surface mounted, fascia mounted or core drilled. The standard finish is a #4 brushed satin but others finishes are available.

Q-line Stainless Steel Railing System SL1-2000

The SL1-2000 is our single line railing system. This railing system is ideal for areas that do not need to meet the 4″ sphere code requirement but still keeps pedestrians on a guided path.

  • The vertical post is a 1 1/2" × 1 1/2" square profile.
  • The top cap is a 1 1/2" dia. round profile and attaches to the vertical post mechanically so no welding is necessary.

This system can be surface mounted, fascia mounted or core drilled. The standard finish is a #4 brushed satin but others finishes are available.

Stainless Steel Cable Railing System RP1-2000

The RP1-2000 cable railing system is an all-round profile railing system.

  • The posts are a 2" round profile and they are pre-drilled for cables.
  • The top cap is also a 2" round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
  • The cable system is a 3/16" 1×19 dia. cable with adjusters at each end of the cable for tensioning.

This system can be surface mounted, fascia mounted or core drilled. This system is offered in a Type 316 stainless steel for higher corrosion resistance or a Type 304 stainless steel for less corrosive environments. The standard finish is a #4 brushed satin but others finishes are available.

Stainless Steel Vertical Cable Railing System VC1-2000

The VC1-2000 cable railing system is our vertical cable railing system.

  • The vertical post is a 1 1/2" × 2" rectangular profile.
  • The horizontal upper and lower posts that the cable attaches to are a 1 1/2" × 1 1/2" square profile.
  • The top cap is a 2" dia. round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of 3/16" dia. 1×19 cable 3" o.c. with a decorative dome head fitting at the upper and an adjustable fitting at the lower end for tensioning.

This system can be surface mounted, fascia mounted or core drilled. The standard finish is a #4 brushed satin but others finishes are available.

This is a welded stainless steel railing system with vertical stainless steel cable infills. The system is designed with options for either bolt in or core drilled cable railing applications. The 3/8" × 1 1/2" flat bar vertical balusters are constructed of stainless steel in a standard #320 non-directional finish or powder coating. The horizontal pieces are constructed of 1 1/2" stainless steel u-shaped bars. The handrail is designed from a 1 1/2" stainless steel tube.

  • Stainless Steel Handrail System 2100 – Utilizes a stud to stud with cap nut connector on one end and stud to stud with ball end on the opposite end.
  • Stainless Steel Handrail System 2100-TB – Connects the cable to the baluster with a tie bar threaded at each end.
  • Stainless Steel Handrail System 2410 – For a dome head to stud connector select the System 2410.
  • Stainless Steel Handrail System 2510 – Designed with a stemball to stud connectors.

Stainless Steel Cable Railing System SP1-2000

The SP1-2000 cable railing system is our most popular and cost effective railing system.

  • The posts are a 1 1/2" square profile and they are pre-drilled for cables.
  • The top cap is a 1 1/2" round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
  • The cable system is a 3/16" dia. cable with adjusters at each end of the cable for tensioning.

This system can be surface mounted, fascia mounted or core drilled. The standard finish is a #4 brushed satin but others finishes are available.

Stainless Steel Cable Trellis System 2000-60

Seco South’s Stainless Steel Cable Trellis System 2000-60 is a trellis system that suits foliage applications such as jasmine, gardenia, rose bushes, climbing roses and other similar weight plants. The stainless steel standoffs that mount to the wall are almost invisible when the foliage is in full bloom. The simple attractive design details are beautiful when visible due to young plants as well. The stainless steel wall mount supports the foliage four inches from the wall or structure.

The 2000-60 Stainless Steel Cable Trellis System is ideal for residential or commercial installation. Create a living wall in a garden, outdoor restaurant, downtown business district or other locale by installing the stainless steel cable trellis system between two structures. Plant a climbing vine in the ground near the trellis and train the plant to climb the cable trellis system. The system can be utilized in both tropical and moderate climates.

Stainless Steel Cable Railing System FB3-2000

The FB3-2000 cable railing system is a combination of flat bar and round profile railing system. This system is similar to our FB1-2000 except the cables are visible as they pass through the post.

  • The posts consist of (2) 1/2" × 1 1/2" flat bars bridged together by (2) 1/2" × 1 1/2" gusset plates.
  • The top cap is a 1 1/2" round profile and attaches to the vertical post mechanically so no welding is necessary.
  • The cable infill system consist of (13) horizontal layers of cable for a 42" high rail and (11) layers for a 36" high rail.
  • The cable system is a 3/16" 1×19 dia. cable with adjusters at each end of the cable for tensioning.

This system can be surface mounted, fascia mounted or core drilled. This system is offered in a Type 316 stainless steel for higher corrosion resistance or a Type 304 stainless steel for less corrosive environments. The standard finish is a #4 brushed satin but others finishes are available.